09120786892
atrinelectronic@gmail.com تهران پاساژ امجد طبقه1 واحد 16

ماژول بلوتوث HC-06 and adapter اورجینال

HC06 Bluetooth to Serial Wireless UART
ماژول بلوتوث با ارتباط سریال با پشتیبانی بلوتوث ورژن دو و EDR HC-06 and adapter Bluetooth Modules (802.15.1) BLUETOOTH-SERIAL-HC-06
تعداد
تخفیف
قیمت
+1
245,700 تومان
+5
2.1 %
240,500 تومان
+10
3.9 %
236,000 تومان
توجه: حداقل تعداد خرید این محصول 1 عدد می باشد.

نقد و بررسی اجمالی

ماژول بلوتوث با ارتباط سریال با پشتیبانی بلوتوث ورژن دو و EDR HC-06 and adapter Bluetooth Modules (802.15.1) BLUETOOTH-SERIAL-HC-06

 

 دریافت دیتا شیت

User Instructional Manual

The HC-06 is a slave Bluetooth to serial adapter. It measures only 28mm x 15 mm x 2.35mm.
Possible baud rates: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200

Manufactured By Atomic Market 
Allows your device to both send or receive the TTL data via Bluetooth technology without connecting a serial cable to your computer. 
Works with any USB Bluetooth adapters. 
Default Baud Rate: 9600,8,1,n. 
Built in antenna. 
Coverage up to 30ft. 
Bluetooth version: V2.0+EDR 
Operating voltage: 3.3V 
Default Baud Rate: 9600,8,1,n. 
Signal coverage: 30ft 
Item size: 4.3 * 1.6 * 0.7cm 
Item weight: 3g 
Package size: 9 * 3 * 1cm 
Package weight: 8g 
Commercial Series: Bluetooth module board Series 
With LED indicator light, use 150mA and 3.3V regulation chip. 
With VCC.GND.TXD.RXD foot for the Bluetooth 
With "Re-seach" button(ON/OFF/WAKE foot for it , external MCU outinput "High level" can control module to re-seach) 
Compatible with bluetooth master module".slave module"or master-slave(whole) module. 
Input voltage: 3.3~6V 
Size: 1.55cm*3.98cm 
Note: 
input power supply 3.3~6V, Prohibit more than 7V 
No "Automatically prevent power supply peversing func", so please correctly connect power supply 
We advise to install "Bluetooth master module" 
The "State" is output foot for LED status, when bluetooth "Unconnected", output "Pulse" ; when bluetooth "connected", output "High level", we can determine the states from "MCU" 
If only the board , No any "Bluetooth Function "

AT commands

Default settings of the HC-06:
Slave
9600, N, 8, 1
Name linvor
Pincode 1234

Command test

Sent:  AT
Receive:  OK

Change baud rate

Sent:  AT+BAUD#
Receive: OKbaud
1: 1200
2: 2400
3: 4800
4: 9600
5: 19200
6: 38400
7: 57600
8: 115200
Example
Sent:  AT+BAUD1
Receive:  OK1200

Change device name

Sent:  AT+NAMEname
Receive:  OKname
Example
Sent:  AT+NAMEblue
Receive:  OKblue

Change pin code

Sent:  AT+PINxxxx
Receive: OKsetpin
Example
Sent:  AT+PIN9999
Receive: OKsetpin
به سبد خرید اضافه شد.
سبد خرید
Item removed. بازگرداندن